Product Name : Self Locking Nuts
Product Introduction

Product Model : GUK

proimages/product/04Self_Locking_Nuts/04-01_GUK.jpg

Material: SS41

Nylon material: PA6

Standards: M10-M100.

Part NoThread*pitchH/mmh/mmD/mmD2/mmt/mms/mmNo.of grooves for hookKg
GUK00 M10*0.75 7.4 4.5 18 15 15 3 4 0.009
GUK01 M12*1.0 7.4 4.5 21 18 18 3 4 0.009
GUK02 M15*1.0 8.4 5.5 24 21 21 4 4 0.012
GUK03 M17*1.0 8.4 5.5 28 24 24 4 4 0.018
GUK04 M20*1.0 9.4 6.5 32 27 27 4 4 0.025
GUK05 M25*1.5 10.3 6.5 38 33 33 5 4 0.035
GUK06 M30*1.5 10.9 6.5 44 38 38 5 4 0.046
GUK07 M35*1.5 11.1 7.0 50 44 44 5 4 0.062
GUK08 M40*1.5 12.1 8.2 56 50 50 6 4 0.080
GUK09 M45*1.5 12.1 8.2 62 55 55 6 4 0.095
GUK10 M50*1.5 12.7 8.5 68 61 61 6 4 0.130
GUK11 M55*2.0 13.2 8.5 75 68 68 7 6 0.160
GUK12 M60*2.0 13.2 8.5 80 73 73 7 6 0.170
GUK13 M65*2.0 14.3 9.5 85 77 77 7 6 0.185
GUK14 M70*2.0 14.3 9.5 92 84 84 8 6 0.23
GUK15 M75*2.0 15.3 10.5 98 89 89 8 6 0.27
GUK16 M80*2.0 16.3 11.5 105 96 96 8 8 0.34
GUK17 M85*2.0 17.3 12.5 110 100 100 8 8 0.39
GUK18 M90*2.0 17.5 12.5 120 110 110 10 8 0.54
GUK19 M95*2.0 18.5 13.5 125 115 115 10 8 0.6
GUK20 M100*2.0 19.5 14.5 130 120 120 10 8 0.68
  • Unnecessary to add any tooth lock washer.
  • Unnecessary to mill a keyway on the shaft and shorten its assembled time.
  • Allow to be used after repeatedly screwing.
  • Bearing any vibration and ensuring the integrated resistance when not tightened.
  • The surface is galvanized to prevent rust.